|
|
 |
CARTRIDGE COLLECTOR MODULES
Powder Reclaim
Models PM-3500, PM-4500, PM-6000 |
| |
|
|
PM Series Modules Rohner PM Series modules are compact, high efficiency catridge - style collector modules with standard capacity up to 6000 C.F.M. Custom modules offer up to 16,000 C.F.M.
Rohner modules are the preferred choice for batch and conveyorized manual-application powder systems.
Engineered Energy Efficient Rohner modules are engineered to the highest industry standards. Our low-static design incorporates a high filter cloth - to - air ratio, constant digital transducer filter static monitoring and automatic cycle start/stop backpulse filter cleaning. These factors result in reduction of blower HP and lower compressed air requirements, which extends filter life and reduces energy consumption.
Durable Construction Modules housings are constructed of 14 & 12 gauge steel, pre-punched for nut and bolt assembly. Modules are available in either gray polyester powder coat or G90 galvanized finishes. Modules are factory assembled and double - seam sealed with urethane sealant. Modules come with pre - mounted and wired UL industrial control panels. |
|
|
|
|
|
|
|
• Factory Pre-Assembled
• Durable Powder Coated Finish
• Modular Design Allows Multiple Modules
for High CFMA pplications
• Available in Both Reclaim
and
Spray-to-waste Configurations
• Designed to comply with NFPA33,
OSHA and NEC Regulations
• Adjustable Air Volume Contro
• Direct Drive Motor for Quiet, Smooth Operation
•
Custom Configuration Available
to meet Minimum Space Requirement
• Removable Manifold for
Common Carrier Freight
|
|
|
| |
 |
| |
| |
CFM@4"S.P |
Fan Class II ACF |
Motor TEFC |
Primary Filters
99.8%, 1.0 Micron |
SecondaryFilters
MERV14 |
|
|
|
| |
| PM-3500 |
3,500 |
15" |
5HP |
(6)12.75"Øx26" |
(2)24"x24"x4" |
| PM-4500 |
4,500 |
15" |
5HP |
(6)12.75"Øx26" |
(3)24"x24"x4" |
| PM-6000 |
6,000 |
15" |
7.5HP |
(6)13.75"Øx26" |
(4)24"x24"x4" |
|
|
|
| |
|
Housing
• 14 Gauge Housing
• 12 Gauge Reinforcement
• Nut & Bolt Modular Construction
• Polyester Gray Powder Coatedor G-90Galvanized Finish
• 1”Acoustical Lined Blower Section
• Blower Inspection Panel
• Aluminum Spark - Resistant Acoustifoil Blower
• TEFC C-Face5, 7.5HP3 – Phase Motors
• Lessthan 4:1 Air - to - Cloth Ratio
• Polyester Spunbound Cartridge Primary Filters
• Rigid Cell4” Final Filters
• Roll - out Powder Collection Drawe
• (3) 3/4" 24 DCV Quick - Acting Back Pulse
Solenoid Valves
• Adjustable Volume Damper
• 90 PSIG Manifold w/ Pop-Off Safety Valve
|
|
Controls
• UL 508 Industrial Control Listed
• 230/460V Non-Fused Disconnect
• NEMA 12 Dust Tight Enclosure
• Electronic Dust Collector Timer Controller
• User Adjustable Parameters
• Automatic/Manual/Down-time Cleaning Cycle
• Pressure Transducer
• Digital Readout
• 4-20ma. Process Output
• 6-22 Channel DCV Solenoid Outputs
• Panel Mounted Magnehelic
• Dirty Filter Alarm/Shut-down
• Illuminated System On/Off Selector
• Hand/OFF/Auto Cleaning Cycle Selector
• Motor (s) Starter with Overloads
|
|
|
| |
|
• Fluidized Recovery Bed w/Transfer Pump
• Box Chute for Easy Fill Powder Dispensing
• HEPA Final Filtration
• Galvanized G90 Finish
|
|
• Hopper, Sieve & Reclaim Controls
• Booth Lighting Circuit
• Multiple Module Controller
|
| Magnehelic and Photohelic are registered trademarks of Dwyer Instrument, Inc. Information contained in this brochure is subject to change without notice. |
| 2650 NE Andresen Rd. #102 Vancouver, WA 98661 TEL: (360)885-7641 FAX: (360)896-5748 - info@rohner-usa.com www.rohner-usa.com |
|
|
| |
|
|
|
|
|
